FRS %'S

lor
lor Registered Posts: 68 Epic contributor 🐘
Hi all,

What frs % would be used for the following: 25620 Machining, please?

Please note the following:

When looking at the vat cert, please note registration was not done by myself, it's states machining.

Client works for airbus as a certified and airworthy engineer.


Thank you kindly :)

Comments

  • lor
    lor Registered Posts: 68 Epic contributor 🐘
    Thank you mrme89.
  • lor
    lor Registered Posts: 68 Epic contributor 🐘
    But unsure whether he should be under that % and sic code?
  • MarieNoelle
    MarieNoelle Registered, Moderator Posts: 1,368
    How about this?

    "Manufacturing fabricated metal products 10.5%

    Builder’s and carpenter’s metal products
    Containers and tanks, reservoirs, boilers and radiators
    Cutlery, tools, locks and hinges
    Forging, stamping, pressing or roll forming of metal items
    General mechanical engineering
    Steam generators
    Steel drums and other light metal packaging
    Wire products, nails, screws, other fasteners, chains and springs"
  • Gem7321
    Gem7321 Registered Posts: 1,438 Beyond epic contributor πŸ§™β€β™‚οΈ
    Can you please expand, does he only repair the parts/components or does he also test and fit them? If he doesn't fit them I don't think vehicle repair will work because he's not repairing the vehicle he is repairing the parts and components. I would be tempted to say 'any other activity' at 12%.
  • lor
    lor Registered Posts: 68 Epic contributor 🐘
    He works with aircraft as an engineer. Does that help?
  • lor
    lor Registered Posts: 68 Epic contributor 🐘
    edited July 2015
    Job description is: airworthy engineer dealing, with materials and processes, relating to the manufacturing of metallic aircraft parts for the wing.
  • lor
    lor Registered Posts: 68 Epic contributor 🐘
    Thank you all for your responses.
  • Gem7321
    Gem7321 Registered Posts: 1,438 Beyond epic contributor πŸ§™β€β™‚οΈ
    edited July 2015
    @lor I'd also recommend having a read of VAT Notice 744c in particular para 6.4 https://www.gov.uk/government/publications/vat-notice-744c-ships-aircraft-and-associated-services/vat-notice-744c-ships-aircraft-and-associated-services#repair-maintenance-modification-and-conversion-of-ships-aircraft-and-their-parts

    If your engineer is working on mainly qualifying aircraft which may be zero-rated I wonder if he would be better-off on standard scheme?
  • lor
    lor Registered Posts: 68 Epic contributor 🐘
    I'll have a read now.
  • lor
    lor Registered Posts: 68 Epic contributor 🐘
    edited July 2015
    Ok,it sounds like vat can't be charged on his work as it is zero rated. This is quite a odd one as the previous accountant has set it up this way.
  • Gem7321
    Gem7321 Registered Posts: 1,438 Beyond epic contributor πŸ§™β€β™‚οΈ
    If the aircraft is a newbuild then it would be standard rated. If it is a modification or conversion (and I would say that manufacturing of metallic aircraft parts for the wing could be considered part of an overall repair/conversion) then 744c applies. I think if he was manufacturing the actual wing then we would need to be looking at manufacture, but he is manufacturing parts of the wing.

    You'll need more info from the client to determine whether standard scheme would be best in relation to 744c. If he deals with airlines, repair facilities and govt agencies then it may well be best and the onus is on the customer to notify your client if 744c applies. If he is dealing with Joe Bloggs in his sport aircraft then it's probably not going to be relevant and you'll need to look at the FRS again.

    I don't think a VAT specialist is necessary but a call to the VAT helpline probably won't go amiss. Also, the aviation industry is fairly small and incestuous, does he have a close customer whom he could ask for further advice?

    Also feel free to PM me - I work in the aviation industry but not in repairs.
  • lor
    lor Registered Posts: 68 Epic contributor 🐘
    I have asked for a copy of his contract. I also have been having discussions with an accountant I know. I first of all said machining as that is the scheme the previous accountant has put him under. But in actual fact he is an engineer dealing with processes and materials relating to the manufacturing of plane wings.
  • lor
    lor Registered Posts: 68 Epic contributor 🐘
    He works for airbus, but gets paid by an intermediary company. I await for more info from client for now and will keep you posted.
Privacy Policy