Another query on Sage

System
System Posts: 100,537 🤖 Admin 🤖
edited June 9 in General accounting discussion
Hi
Forgive me if this has been brought up before, I have trawled through the searches but cannot find anything relating to my problem.
I have Sage Line 50 V12 and my client has Sage Line 50 V13.01.
I am having problems transfering data to my Sage, it will restore but when I go into suppliers there is nothing there apart from a few unreadable lines.
The nominal and bank are fine.
As I've never restored from a later version to an earlier version before, my question is can it be done?
I know V13 had some glitches which my client has encountered so perhaps this could be the problem?


Many thanks
Sharon

Comments

  • System
    System Posts: 100,537 🤖 Admin 🤖
    Re:Another query on Sage

    The usual answer is that you can transfer 'forwards' but not 'backwards' I'm afraid - sometimes it works most of the time it doesn't.

    And yes there are still some lovely glitches with V13 - why will they never leave it alone?
  • System
    System Posts: 100,537 🤖 Admin 🤖
    Re:Another query on Sage

    Hi Sharon

    Yes, Gill is right. You can only go forwards not backwards in Sage.

    To get round this, I have now got two different versions of Sage (12 and 13) installed on my computer :roll:

    I sounds as though you might have to buy V13 :cry:

    Claudia
  • System
    System Posts: 100,537 🤖 Admin 🤖
    Re:Another query on Sage

    Thanks Gill & Claudia.

    You've confirmed my worst fear about upgrading to V13!! :cry:
    My client's software has lots of recurring entries which appears to be one of the glitches and is going to be a nightmare to sort!

    Sharon
  • System
    System Posts: 100,537 🤖 Admin 🤖
    Re:Another query on Sage

    Most of the glitches have been sorted now, and I am even beginning to like some elements of it :wink:

    Claudia
  • System
    System Posts: 100,537 🤖 Admin 🤖
    Re:Another query on Sage

    Hi

    Are you going to be making the adjustments in Sage or are you creating journals for your clients to make the adjustments?

    You could always ask your Client to export the data to Excel using the Sage Intergrated Reporting facility. I've started using it recently and found it very useful for viewing Sage reports, in fact I sometime use that instead of viewing the reports through Sage as the additional facilities within Excel can be very useful.
  • System
    System Posts: 100,537 🤖 Admin 🤖
    Re:Another query on Sage

    Hi Sue
    I'll be making the adjustments through Sage myself.
    Thanks for the tip though as it looks like I'm going to have to go through things with a fine toothcombe.

    Is the Sage Intergrated reporting facility different from exporting as a csv file to excel?

    Sharon
  • System
    System Posts: 100,537 🤖 Admin 🤖
    Re:Another query on Sage

    Hi Sharon

    I'm sure you know this anyway, but I take it your client won't be posting transactions at the same time, unless you have Sage Client Manager?

    Yes, there is a difference with using the Sage Intergrated reporting, I found it a lot more user friendly!!!

    Sue
  • System
    System Posts: 100,537 🤖 Admin 🤖
    Re:Another query on Sage

    Thanks Sue
    I'll give the intergrated reporting a go :D


    Sharon

Categories

Privacy Policy