Current updates regarding coronavirus (Covid-19) and the precautions AAT are taking will be continually updated on the below page.

Please check this link for the latest updates:

We hope you are all safe and well and if you need us we will be here. 💚

Please check this link for the latest updates:

We hope you are all safe and well and if you need us we will be here. 💚

# Quality Candles - Unit 6 Simulation

anniebabe
Experienced MentorRegistered Posts:

**595**
Hi Guys

Quality Candles - Unit 6 ECR Simulation

Has Anyone ever done this simulation before? It is in the Osborne Workbook.

I am fortunate to have a copy of the answers for this sim but I am struggling to understand why they are using the High Low Method on Task 11 - for packing overhead cost .

Any help is much appreciated.

Quality Candles - Unit 6 ECR Simulation

Has Anyone ever done this simulation before? It is in the Osborne Workbook.

I am fortunate to have a copy of the answers for this sim but I am struggling to understand why they are using the High Low Method on Task 11 - for packing overhead cost .

Any help is much appreciated.

0

## Comments

2,453I haven't got the books, but the high low method is usually used for costs where you have a fixed and variable part and your trying to work out what the variable part and the fixed part is.

If that doesn't help and noone with the books comes along, feel free to post the question and I'm happy to have a look.

595981Overhead cost= fixed element + variable element

Eg Light heat and power cost

100 units 200 units

October £400,000 £600,000

therefore we have

100 units --> £400,000 cost if we just divide 400,000/100 it gives us £4000 cost per unit

200 units --> £600,000 cost if we just divide 600,000/200 it gives us £3000 cost per unit

so as the unit cost is different the above shows that light heat and power is cost that has a fixed element and a variable element

to calculate these

use the formula y = m*x + c where

y is the total cost

m is the variable cost per unit

x is the number of units

c is the fixed cost element

so with the above figures we have

400,000 = 100*m +c

600,000 = 200*m +c

With these two equations you can calculate m and c

m = £2,000

c = £200,000

(check:

100 units * £2,000 + £200,000 = £400,000

200 units * £2,000 + £200,000 = £600,000)

So if when calculating unit costs you get different figures from two different number of units is because the cost has a fixed element and a variable element

Some overhead costs are of this nature: telephone costs (there is a minimum charge + whatever calls you make, energy costs there is a minimum charge + whatever watts are used)

Hope the above helps, but you are more than welcome to post the question and as Rinske said we can help with the actual figures

585You will have been given values of expenses at a given activity / production

Exenses consists of Fixed costs, Variable Costs and Semi-Variable costs.

FC and VC are easy to work out.

However, for semi-variable costs FC will remain the same but VC will change with production activity.

Therefore you have to use High-Low method to work out FC and VC elements in a semi-variable costs expenses.

595Will have another look today.

thanks again.

595I understand that the packing overhead cost is variable so i need to use the high low method. getting 20 pence per case of candles but after that I am not sure what they are doing. and the simulation is quite long to retype and post on here - i am dooomed - lol

2,034http://forums.aat.org.uk/showthread.php?t=26303&highlight=High+Low

[email protected]

www.sandyhood.com

595